Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Last Updated: 18.06.2025 00:27

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

There are two important concepts here.

Upvotes:

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

Is Jesus God almighty?

Barnstars:

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

What does a fuse do?

Do you think the number of sissies is on the rise?

For this case there are devices called Metal oxide varistors (MOV).

One

what exactly is a ‘surge’ protector?

How do you find out who your handler is as a targeted individual?

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

He then describes the function of a fuse.

At least they know the answer if they wanted it.

What is a narcissist grandmother like, with her grandchild?

(Dc diagram shown, AC is similar).

The other is “what does a “fuse” do?”

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

What's the point of gender reassignment surgery which doesn't change a person's chromosomes?

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

What is lightning?

But it can get overloaded, and no longer works.

I have a "fat pussy" and I'm super self cautions about it. Do guys think it's gross?

These are simplified answers to the original question, and does not change anything I wrote above.

Now when you have a certain ac resistance, then a current flows in a loop.

but I think this circuit , shows a few more pieces.

Bats don't get cancer, now scientists think they know the reason - Earth.com

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

but this device (an Inductor) … impedes the rapid changes in the current.

Adam Scott, nearly 45 years old, with chance to redefine career on U.S. Open Sunday - NBC Sports

This is where the MOV conducts again, and dissipated the energy.

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

Shakira Says Being an Immigrant in the U.S. Amid Trump’s Policies “Means Living in Constant Fear” - The Hollywood Reporter

At one ohm, the resistor has a maximum of 1 watt power.

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

[old diagram got deleted by accident]

My waist finally looks like how it did before I had kids but I didn’t lose weight. Why am I still 15 lbs from my starting weight?

This device then solves the entire problem.

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

The third is lightning and “how it gets conducted into a home.”

What would explain Trump blaming Ukraine for starting the war with Russia?

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

The bolt then partially travels down the line to your home.

What was the most inappropriate thing your parent caught you doing as a teen? Was in the bedroom, I thought nobody else was home. My sister and I shared that bedroom but I knew she was gone. I didn’t know my dad was home though.

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

This one hit behind the barn.

‘Gas station heroin’ is technically illegal and widely available. Here are the facts - WANE 15

nine

Here is a simplified AC power diagram.

so, what happens?

Have you experimented with bestiality?

This is where this question deviates from being a 'generic' question, and becomes more specific.

2024–10–16 [ OO OLAOYE OYEBODE ]

So, the voltage could go up to 500 volts, and the fuse will not open up.

I discovered the 5 plants that moles hate, to stop them from causing havoc in my backyard - Homes and Gardens

These devices are installed between the “hot” and “neutral” and protective ground.

This is the picture of an electronic coil of wire wound around a core of magnetic material.

In schematic diagrams this is the symbol for a fuse:

This is 'the assistant's answer'

He then asserts :

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

The MOV will conduct when the voltage exceeds 50% of line voltage.

An AC voltage/ current source, and an ac inductive load.

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

eight

First Sentence:

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

Edit 2024–10.

[image of Common-mode choke]

a photo is worth a thousand words.

One is “what exactly is in a ‘surge protector’ ? ”

Because the load is inductive, the current lags the voltage.(by a bit).

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

It seems Mohan does not understand the difference between a comment and an Answer.

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

2024–10–10[John johnson John Johnson ]

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

A fuse is a non-resetable over current circuit protector.

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

It also is a device that limits the change in current flow.

I post the exact comment here.

Can the fuse protect the electronic devices from lightning instead of a surge protector.

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

the problem then depends on "how fast does the fuse operate?".

2024–10–14 [Omar Gharbi Omar Gharbi ]

He then describes Rainy Season and Lightning.

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

A circuit breaker is similar, but is resettable.

There are three different concepts here that are getting confused.

But… the neutral is now “floating” because of the 1 ohm resistance.

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.